How To Break And Bend Aluminum Plastic Pipe

In the process of house decoration, we are using more and more pipe materials, such as aluminum plastic pipes, which are usually used for heating. Many people know that aluminum plastic pipes are particularly hard. If it is difficult to bend aluminum plastic pipes, what should we do if we want to bend aluminum plastic pipes? Let's have a look.

1、 What should I do if I want to bend the aluminum plastic pipe?

In the process of decoration, if you want to bend the aluminum plastic pipe, you can use a spring bending tool to bend it, or you can directly clamp the aluminum plastic pipe with a pair of pliers and gently break it down. This can also be the bending of the aluminum plastic pipe. However, it should be noted that when breaking the aluminum plastic pipe, you must slowly bend it with gentle force. If the force is too large or too fast, the aluminum plastic pipe will be easily broken, In addition, it should be noted that the degree of bending aluminum plastic pipe should not be too large, for example, do not directly bend to 90 degrees, which will easily lead to pipe deformation, and in serious cases, the nozzle will be blocked. Therefore, when you want to bend the aluminum plastic pipe to 90 degrees, you need to use a joint to complete it.

2、 What should be paid attention to when using aluminum plastic pipes as floor heating pipes?

1. When we usually use aluminum plastic pipes to make floor heating pipes, we should pay special attention to the selection of materials, because it depends on whether the specifications and dimensions of the pipes are in accordance with the relevant regulations. Never buy some unqualified pipes for cheap, which will lead to a great hidden danger in future heating. In addition, it is difficult to reform if there are some problems after the floor heating pipes are made.

2. In addition, when using aluminum plastic pipes as floor heating pipes, pay attention to determine the spacing between the pipes. Because the radiator volume will supply a particularly high water temperature, in order to ensure that the service life of the pipes can be extended, and to avoid excessive floor temperature, when using small heat exchangers to convert water supply temperature, the spacing between aluminum plastic pipes should be calculated according to the specific situation

Hot Tags: how to break and bend aluminum plastic pipe, China, suppliers, manufacturers, factory, wholesale, cheap, discount, low price, in stock, free sample, PEX Brass Fitting, Gas PEX AL PEX Pipe, PEX AL PEX Pipe Laser, PEX AL PEX Pipe Overlap