PPR Inner Tooth Elbow And Inner Wire Elbow Are Actually The Same Meaning

Inner teeth and inner silks are just called differently. The function is to connect the angle valve, the water nozzle, the wire, and so on.

The commonly used specifications of the inner wire elbow are 1/2, 3/4, 1, 1*1/4, 1*1/2, 2, which are inches; replaced by millimeters: 15, 20, 32, 40 , 50.32 wire is 1*1/4 inches. 8 cents = 1 inch, which are 4 cents, 6 cents, 1 inch, 1.2 inches, 1.5 inches, and 2 inches. The nominal pipe diameter value of ppr pipe is actually one size smaller than that of steel pipe. Such as 32 ppr pipe is equivalent to 25 steel pipe.

PPR inner wire tee de25*2/1 refers to a tee with De25 ports on both ends and a 1/2 (DN15) inner wire port in the middle.

The PP-R pipe is plastic. When the end is connected to the valve, the inner wire needs to be directly converted. The inner wire is directly plastic, and the other is metal wire. The plastic part is connected with PP-R hot melt, and the thread is connected with metal parts. connect.

Tee is also known as pipe fitting tee or tee fitting, tee joint, etc. It is mainly used to change the direction of the fluid, and is used at the branch pipe of the main pipeline. Can be classified by pipe diameter