How does PPR pipe heat melt? These several major items to pay attention to!

Cutting steel tubes

Choose non-damaged pipe fittings to ensure that the pipe is cut smoothly, without burrs and edges, and smooth and smooth.

Select appropriate tools according to the diameter of the pipe to be cut. Professional pipe shears are used for general pipe diameters. Saw blades are required for large pipe diameters.

Clean the PPR end face 

The connecting end face between the tube and the pipe must be kept clean, dry and oil-free.

The depth of the mark

Use calipers or pencils to mark the depth of hot melting to avoid overheating.

Pipe heating

Put the tube end into the heat pipe sleeve at 260-280℃, and reach the marked depth.

Do not rotate the pipe end during the connection process, push the pipe fitting to the heating pipe, the position can reach the specified mark.

Hot melt connection

After heating for a certain amount of time, quickly insert horizontally to previously marked depth.

Do not push too hard to prevent the tube head from bending.