how to remove pvc pipe from fitting

    How to remove PVC pipe

    When disassembling pipes, we should also master the corresponding method, but the method of switching water pipes with different materials is not the same. In order to reduce the damage to pipes, we must choose the most appropriate method to execute. The following is the common water pipe disassembly way.

    1, saw directly, but this way will damage the pipe fittings, saw along the tee, and then dig the pipe connected inside the outlet, tee pipe and the previous new similar, can also be used twice, but another water pipe can not be sure whether it can then be used.

    2, according to the characteristics of thermal expansion and cold contraction of the pipe, the glue will reduce the thermal viscosity, so take hot water glue in the place where the pipe fittings are connected for a few minutes, and then pull out the two pipe fittings. This way will consume a lot of hot water, but it will not damage the pipe fittings, so it can be used again later.

    3. This way is similar to the second, but it is through the hair dryer. Note that the heat of the hair dryer is generally indicated locally, so compared with hot water, the effect is not so good.

    4. Brush the PVC glue to the inner wall of the pipe fitting, burn it for 10 seconds, and then quickly take a screwdriver to pry out the inner wall, so that the two pipe fittings can be separated, and the pipe fitting can be used again.