Products

PPR Double Elbow Fitting

A PPR duplex elbow is a pipe connection used to change the direction of two pipes or piping systems by 90 degrees. It is usually used in systems such as hot and cold water piping, industrial...

Brass Male Elbow Fitting

1. high tensile strength, good wear resistance, and no reduction in performance at high loads. 2. good electrical conductivity, especially at higher current densities, the electrical conductivity...

Brass Compression Male Tee

PEX copper ferrule external tee has the following characteristics. 1. Stable performance: PEX copper ferrule external tee adopts the structure of copper ferrule pressed together, and the three...

PEX Brass Gas Valve

PEX valves have high temperature resistance, which can reach 300°C. Because PEX has good heat resistance, it does not become brittle at high temperatures, but maintains its original elastic...

PPR Ball Valve

PPR valve, is a plastic made of polypropylene (Polypropylene, referred to as PP) and polyethylene (Polyether, referred to as PE) of the basic elements of the basic components of the chemical...

81063 Brass Ball Valve

At present, there are various ball valve brands in the market, among which, the ball valve produced by Yifan has gained the favor of more and more users with its fine craftsmanship and high cost...

PEX PPSU Sliding Elbow

PPSU fittings are mainly used for electrical and electronic equipment connections, which can provide high strength, corrosion resistance and high temperature resistance, and are used in...

Brass Compression PEX Fittings

A pipe fitting with three openings is called a tee. Tee pipe is widely used in the pipeline network for conveying liquid and gas. One inlet, two outlets; or two inlets, one outlet. It is a kind of...

IFAN Brass Manifold

The role of floor heating manifold 1、Regulate the temperature Floor heating manifold is used to divide the flow, if the full open water flow is circulating fast, the indoor temperature is high, if...

PVC Pipe Fitting

The 45° elbow is a pipe fitting and pipe connection. Used in the main pipeline and branch pipe. Used to change the direction of the pipe. 90° elbow is a common connection fittings used in plumbing...

PPR Male Socket

How to weld PPR pipe？ 1, the temperature control should be correct. PP-R hot melt welding temperature is: 253C-274 °. If the temperature is lower than 253, the pipe and pipe fittings is only a...

PPR Pipe Advantages

PPR hot water pipes can be used at a temperature of 95°C for a long time, and there is a risk of freezing and cracking when it is below -20°C. The load-bearing capacity of PPR pipes is generally...