It is a very common problem in life that the drainage pipes are blocked and the sewage cannot be removed in time. Dirt clogged in the drain can also create odor problems. Most of the reasons for clogged drains are because there is no filter installed, or because the pipe selection and setting are not reasonable.
Solution:
1. Regular disinfection and maintenance of pipelines
2. Use professional pipeline maintenance agent to maintain
3. Regularly disinfect and sterilize the sewer cleaning machine
4. Keep the sewer pipes unobstructed
5. Pour an appropriate amount of baking soda into the sewer, and then pour in an appropriate amount of high-concentration vinegar. When the baking soda and vinegar react chemically, the grease and dirt in the pipe can be easily removed.
6. Pour in the baking soda and vinegar mixture:
(1) Water and baking soda: 1 cup of baking soda, 1 cup of lemonade
(2) Salt and a mixture of borax and vinegar: 1/4 cup borax, 1/4 cup salt, 1/2 cup vinegar
Note that before pouring, do not mix the baking soda with the acid, and pour each into the drain separately.
7. Choose a rubber bowl of suitable size, and press up and down hard to generate pressure to flush out the blockage. It works best when the sink is full of water when pressed.
8. Use the hook to pull out the blockage
If the pipe is blocked by hair, use a metal hook to tie it into a long wire with a small hook at the top. Carefully screw the hooked end of the wire into the pipe, after that, rotate the hook to remove all the junk. When the garbage is caught, please pull it out gently. Be careful not to scratch the metal tub or sink in the process. Just be careful not to scratch your hands when using very sharp metal.
9. Slowly pour hot water into the pipe. If you have plastic pipes in your home, don't use hot water. If the water is slowly draining, repeat this process until the water is completely drained. But if the water still hasn't drained, there's likely to be a lot of hair in the pipe that may need to be removed manually.