The correct installation method of the water manifold.

The correct installation method is mainly to install according to the following steps:

1. The first step is to connect the water separator to the water inlet and outlet of the floor heating. After finding the water inlet and outlet of the floor heating, connect the pipes above the water separator to it.

2. The second step is to set two valves on the top of the water divider after the connection is completed. This valve is mainly used to clean or replace the filter, and it will be more convenient to use.

3. In step 3, a bypass pipe needs to be set above the water inlet and outlet of the water distributor, and a valve needs to be set above the bypass pipe to control the switch.

4. The fourth step is to set a drain valve on the top of the water separator. The drain valve is mainly used to drain water, and at the same time, it can also play a role in releasing air, which can effectively prevent it from being blocked during operation. .