What should I do if the faucet does not run out of water?

Reasons and solutions for the faucet not running.

1. One of the more common reasons why the faucet does not water is caused by blockage. This may be due to poor water quality and less faucet cleaning, resulting in the accumulation of a large amount of dirt. Therefore, it is necessary to disassemble the faucet and clean its interior. Accumulated impurities will do.

2. In addition, it may be caused by the rupture of the water pipe. In this case, it is necessary to check the damaged water pipe and replace it with a new water pipe. Before replacing the water pipe, the water valve needs to be closed first.

3. If the faucet does not produce water due to the damage of the valve core of the faucet, the valve core needs to be replaced. The specific operation steps are as follows: first loosen the screws and remove the handle, then pull out the handle upwards, then remove the cover of the valve core, unscrew the card in the valve core in a clockwise direction, and finally remove the faucet. Remove the internally damaged spool, install a new spool, and replace all components.

4. The faucets commonly used by people also include hot and cold water faucets. If there is no hot water, it may be caused by insufficient water pressure of the water heater. At this time, it is necessary to install pressurized water storage equipment and other means. Increased water pressure.