Leaking problems are so annoying that finding out why is key

Water pipe joint leakage: if the joint itself is damaged, it has to be replaced in time. If it is the leakage of the silk mouth, first remove it, to see whether there is a rubber pad: if there is no to install, if the rubber pad aging in time to replace the new, after the new in the silk mouth coated with thick white paint, wrapped on the hemp wire after the installation of the joint; If the shaft gasket in the faucet is caused by wear, use pliers to loosen the gland and remove it, take out the shaft gasket with clamps, and replace with a new shaft gasket.

Water pipe leakage: if it is PVC pipe, you can buy a PVC pipe to their own connection. First cut the broken pipe, insert the connector into one end of the new pipe, so that the cut position of the other end is exactly flush with the other opening in the interface, so that it can be just straightened, and then send directly to this end, so that both ends have a certain cross and then distance. Then remove it and apply it with PVC glue on the direct inside ends and the two outside sides of the pipe. Also can buy waterproof tape to repair water pipe, after entangling, reoccupy mortar waterproof agent and cement to wipe up can.