Leaking problems are so annoying that finding out why is key 2

Iron water pipe leakage: if the iron water pipe has no rust, only part of the position of the damage, the water pipe main valve closed, only need to replace the position of the iron water pipe can be. Cut off the water pipe at the position, and then connect the connecting head; If it is caused by corrosion of the overall water pipe, close the main valve of the water pipe, replace the whole water pipe, and screw the screw buckle on the two heads; Replace the connector if the connector is the problem.

Plastic water pipe leakage: first use a small hacksaw to cut off the leakage - saw edge to be flat. Gently sand the newly exposed port with sandpaper and wipe the port clean with a clean cloth. Apply special glue to the port and let it dry for a while. At the same time, apply glue inside the "bamboo joint" and connect the port with the "bamboo joint". Rotate it repeatedly until it is firm. Do the same with the other end. Then apply just the right amount of glue to the seams to make sure there is no leakage.